background image

64

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PST 4

The

 TATU

 

PM 400

 monitor is designed to suit the needs of each user. It was developed 

by the world's best seller of planter monitors and offers the finest technology on the market. 

The TATU PM 400 tracks seeds and fertilizer in planters up to 18 row units and it is a TATU 

optional part when a planter is acquired.

• Tracks seed and fertilizer - with 36 sensors, being 18 for fertilizer and 18 for seeds;
• Easy and flexible settings - password protected;
• Display mode customizable by the user;
• Audible and visual alarm to indicate flaws in the row units;
• Keeps the information, even when there is a lack of energy;
• Gives precise informations, such as: area to be planted, population, spacing between 

seeds, number of seeds per meter (average, minimum and maximum);

• Informs the plantation speed;
• Allows the plantation at night with total precision, raising the planter income.

Optional

TATU PM 400 monitor

NOTE

For more information, consult the PM 400 manual or search for a local 

representative.

Summary of Contents for PST4























































































Reviews: