background image

4

Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.

PST PLUS

General information

Important

The acquisition of any Tatu product assures to the original purchaser the following 

rights:

• Warranty certificate;
• Instructions manual;
• Technical assistance by the dealer on equipment delivery.
However, the owner must check the condition of the equipment on delivery, as well 

as knowing the warranty terms.

Special attention should be given to the safety recommendations, operation precautions 

and maintenance of the equipment.

The instructions in this manual indicates how to get the best performance and allow 

the operator to get maximum income, increasing the equipment lifetime.

This manual should be read by operators and maintenance staff.

• Only people who own a full knowledge of the tractor and equipment 

must operate them;

• Marchesan is not responsible for any damage caused by accident 

on transporting, incorrect utilization or inadequate storage, either 

by negligence and/or lack of experience from any person;

•  Marchesan is not responsible for any damage caused by unpredictable 

situations or the incorrect use of the equipment.

The warranty shall not be applied to any equipment or any part thereof 

which has been altered elsewhere than at the place of manufacture or 

which the original purchaser thereof at retail has used or allowed to be 

used parts, not made or supplied by Marchesan S/A.

NOTE

Right and left hand side indication are made observing the equipment from the rear.
To order any parts or request technical assistance services, it is required to provide 

the data contained on the nameplate, which is located on the equipment frame.

To the owner

Summary of Contents for PST Plus











































































Reviews: