27
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GAPCR / GASPCR
Assembly
Wheelset bearings adjustment
These disk harrows allow adjustments on the wheelsets through slots (A). This
adjustment is done to centralize the wheelsets with the harrow structure and to eliminate
lateral gaps between the articulation axle and the bearings.
Harrows with one cylinder
: Adjust the bearings centralizing the wheelset with the
frame. Note that the tires must have the same distance in relation to the frame. The
wheelset axle (B) should be without inner gaps against the bearings.
Harrows with two cylinders
: Adjust the bearings centralizing the wheelset with the
frame. Note that the tires or the supporting posts must have the same distance in relation
to the frame. The wheelset axle (C) should be without inner gaps against the bearings.
A
A
C
C
B
B
