25
Marchesan Implementos e Máquinas Agrícolas “TATU” S.A.
GAPCR / GASPCR
Assembly of the disc gangs on the frame
Assembly
IMPORTANT
In the gang assembly to the carriers,
the bearing hangers should remain facing
the disc blades concavity.
Place a bolt (A) with
square washer (B) and pass
it through the bearing and
the bearing hanger hole.
On top, place a flat washer
and nuts.
Repeat this operation
for the other bearings.
The rear gang turns earth to the left and the front gang turns earth to
the right.
Bearing hanger
Bearing hanger
B
B
A
A
The scrapers feature an adjustment to approach or distance them from the
disc blades, on a range from 5 to 10 mm.
NOTE
Scrapers assembly
A
A
B
B
C
C
A
A
Note the fixing points of the scrapers with the end facing the concave side of the disc
blades.
Assemble the scrapers (A) using bolts (B), flat washers and lock (C), which are placed
underneath the fixation plate. On top, place spring washers and nuts.
