VERTICAL TOWED MIXER - TWO AUGERS
MV-30D SERIES
OPERATING FAULTS
Repairs will be carried out by qualified technical personnel from TATOMA.
Before starting any job, you should study and consider the steps to follow.
It will be necessary to consult all the available documentation: diagrams, drawings,
etc., and once the problem is detected, determine which parts must be disassembled
and in what order.
If there is no absolute nowledge of the task to be carried out, before starting any
operation, consult the manufacturer.
The list of possible incidents that may arise during the use of the machine, as well as
the possible causes and repairs are indicated in the following table:
INCIDENCE
Faster turn signal
frequency
POSSIBLE CAUSE
Lighting
- Blown tractor fuse.
- Defective bulb.
- Blown tractor fuse.
Defective bulb.
- Supply wire
disconnected or cut.
- Defective grounding.
REPAIR
- Replace fuse
- Replace light bulb.
- Replace fuse.
- Replace light bulb.
- Check and connect the
cable
- check the ground cable
of the tractor.
- Replace the ground
cable.
- Check the presence of
foreign elements that may
obstruct the maneuvering
of the aforementioned
services.
- Check the valves.
- Dismantle and clean the
valve or replace it if
necessary.
- Check pressures and
replace the pump if
necessary.
- 86 -
The lights don't work
-
Mixing and distribution system
The discharge door or the
folding conveyor do not
work.
- Mechanical jam of any of
these services.
- Valve stuck by some
particle present in the
hydraulic circuit.
- The pump has no
pressure.
Tatoma Ag Equipments Corp. Located in Colcord, OK. Phone (918) 422-4271
