Tatoma EMV-10, Instruction Manual

Page: 10 / 68

VERTICAL TOWED MIXER
4. SAFETY WARNINGS AND RECOMMENDATIONS
4.1. INFORMATION ON ACOUSTICS AND VIBRATIONS
Identify, interpret correctly and respect the warning signs located on
different parts of the mixer, as well as identifying the importance that the
indicators and recommendations included in this handbook play on
contributing unequivocally to avoiding accidents that could cause damage
and serious injury.
Therefore, these instructions should be read paying special attention to
the section dealing with rapid identification and correct interpretation of the
following warning signals.
Symbols used in the instructions handbook
Generally indicates that the instructions that accompany it
are of special importance.
Indicates that the instructions that accompany it refer to
possible risks or dangers of electrocution.
Indicates that the instructions that accompany it refer to
Possible risk of burns produced by corrosive liquids.
Indicates, that the instructions that accompany it makes
reference to possible danger burns caused by high
Temperature liquids.
Safety symbols situated on the machine Location
Warning! Stop the machine the tractor
engine and carefully check the
instructions manual before proceeding
with any maintenance or repair
operation.
Front part of the
mixer alongside the
hydraulic controls.
Warning! Do not open or remove the
protection covers while the engine is
working.
Side of mixer,
alongside the
unloading belt.
Back of the mixer on
the sides.
Warning! Never lower the unloading belt
or the mixer loading system without first
checking if anyone or any obstacle is
within its working area.
Front part of the
machine that can be
seen by the tractor
driver
Mixer side, alongside
the unloading belt.
Warning! Danger due to high pressure
fluids. Check instructions handbook
before starting to carry out any
maintenance operations.
On the hydraulic oil
tank.
Beside the hydraulic
distributors
Page 5