background image

TOWED VERTICAL MIXER

 

 

 

 

 

4.13. STOPPING THE MIXER FOR A PROLONGED TIME 

If, for any reason, the mixer is not used for long periods of time it should 

be parked following the instructions in Section 3.9 of this manual. It is also 
advisable to periodically execute the following operations: 

  Clean and grease all of the mixer’s parts and joints. 

  Disconnect battery terminals (in accordance to the model). 

  Inflate tyres to a pressure of 0.3 above the pressures indicated in 

Table 4.4. 

  Periodically, connect the battery (in accordance to the model), and 

connect the mixer to the tractor’s power takeoff.   Activate all moving 
parts of the mixer executing some movements. Once having 
completed this process, stop the mixer, disconnect the tractor's power 
takeoff, and disconnect the battery.

 

 

If the machine is dismantled the following parts should be recycled:  oils, 

tyres, hydraulic lines and hoses, plastics, and the battery. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 53

 

Summary of Contents for EMV-10





































































Reviews: