63
2H - Rear wheel drive
4H - Four wheel drive (High)
4L - Four wheel drive (Low)
Transfer Case (for 4 x 4
vehicles)
Transfer case allows driver to
select 2 or 4 wheel drive operation.
Your vehicle is fitted with 2 speed,
part time electric transfer case.
Transfer Case Selector Switch :
This switch is electrically operated
& mounted on dash board, and is
provided with 3 selector positions.
2H-
Only rear wheels are driven
and transfer case operates at 1:1
ratio.
4H-
All four wheels are driven and
transfer case operates at 1:1 ratio.
4L-
All four wheels are driven and
transfer case operates at 2.48:1
speed reduction ratio.
GEAR SHIFTING (4X4)
Automatic Hub Lock :
When 4 wheel drive is selected,
automatic hub locks axle shaft to
wheel hub. This occurs when the
vehicle driven in either forward or
reverse direction.
Limited Slip Differential :
(4x4 version only)
A standard differential delivers
torque equally to each wheel. In
case one wheel loses traction and
begins to spin, the differential
distributes rotary speed unequally
but with same torque. This can
cause wheel with good traction to
slow down or stop while the wheel
which lost traction rotates with
increased speed. Such a situation
can prevent the vehicle from moving.
Limited slip differential provided in
the rear axle takes care of such
situations. However during normal
driving, differential action takes
place in the same manner as in a
standard differential.
1. Four Wheel Drive Operation
In 2-H mode, only the rear two
wheels of the vehicle are powered
by the engine and the front wheels
are merely pushed. By shifting to
four wheel drive mode (4H or 4L)
the rear as well as the front axles
are driven by the engine through
the transfer case and transmitting
engine power to all four wheels.
This gives the vehicle increased
traction. In 4H mode, the
Driving
Ofrecido por www.electromanuales.com
