48
Xenon At a Glance
ANTI THEFT / IMMOBILISER AND KEYLESS ENTRY SYSTEM (IF FITTED)
7.
The user has to enter the
existing secret number. The
user must count number of LED
flashes and turn the ignition
switch ON as soon as the count
matches the “1
ST
” digit of the
existing secret code. The LED
will now stop flashing.
8.
Switch OFF the ignition.
9.
The user must enter the 2nd,
3rd and 4th digit of secret
code in similar fashion as
described in step 6,7 and 8
above.
10.
After successful entry of all the
4 digits of existing
secret
code, the cluster LED stops
flashing for 10 sec.
11.
If a wrong secret code is
entered, the LED continues to
flash and the system remains
in immobilised state. To reenter
secret code, switch OFF the
parking lights and start
procedure from step 2
onwards.
12.
Repeat steps 7, 8 and 9 but
with the new 4 digit number.
The digits to be entered can
be from 1 to 9. After
successful entry of all 4 digits
of new secret codes the cluster
LED stops flashing for 10 sec.
13
. Again repeat the steps 7, 8
and 9 with the same new 4
digit number. After successful
entry of all the 4 digits of new
secret code, the cluster LED
stops flashing for 10 sec.
14.
If the new secret code entered
twice is not matching then the
flashing of side indicators will
start for 5 sec. To restart the
procedure of entering new
code, steps from 12 onwards
to be performed. Cluster LED
starts flashing after 10 sec.
15.
If secret code entered twice is
matching then the system
gives information of newly
entered code with the
equivalent number of LED
flashes for each digit, with a
5 sec. gap between 2 digits.
16.
Switch OFF the parking lights.
17.
The newly entered secret
number to be used here after
emergency dis-arming and
remote learning.
NOTICE
No remote will get unlearnt with
this procedure. During this
procedure any key pressed
from the remote will be ignored.
Ofrecido por www.electromanuales.com
