97
MAINTENANCE & CAR CARE
Wheels & Tyres
Connect leads in the order as shown in the sketch :
•
Do not connect the lead to the negative terminal of the discharged
battery.
•
The connection of the -ve lead point should be as far away from
the discharged battery as possible and close to the starter motor
on engine/transaxle.
•
Route the leads so that they cannot get caught by the rotating
parts in the engine compartment.
•
The engine of the car providing the jump start can be allowed to
run during starting.
Attempts to start the engine of the car with the discharged battery
should be made at intervals of one minute and should not last more
than 15 seconds. After starting, allow both engines to idle for
approximately 3 minutes with the leads still connected.
WHEELS & TYRES :
Always use only the recommended size of wheel rims & tyres. Use of
non-recommended rims and tyres may have an adverse effect on car
safety and furthermore could infringe on car regulations.
Wheel Change :
When changing wheels, use the jack provided with the car. The jack
with handle is located on tailgate inner sill.
•
Park the car on a safe level ground. Engage 1st gear and also apply
the parking brake. Place wheel chocks behind the rear wheels and
in front of the front wheels.
Another Car Battery
(Jump Start battery)
Body Earthing
Discharged battery
Location of Jack & Handle
+
_
+
_
Ofrecido por www.electromanuales.com
