87
Rear wheel
Front wheel
Bleeding Nipple
NOTE :
Vacuum Assistance :
The hydraulic brake system of Tata Indica is
assisted by a vacuum booster which reduced the effort of driver during
braking. In the unlikely event of disruption in supply of vacuum to the
booster (e.g. stoppage of engine, or failure of vacuum hose) this
assistance will still be available but only for one or two brake applications
to bring the vehicle to a stop. Beyond this, vacuum assistance will not be
felt by the driver and brakes will appear to be hard/ineffective. In order
to stop the vehicle effectively the driver will have to apply a much
higher force on the brake pedal (roughly 5 times the normal effort)
Never drive the vehicle in engine switched "OFF" condition.
BLEEDING PROCEDURE FOR BRAKE SYSTEM :
1. Clean all dirt from around reservoir filler cap.
2. Fill reservoir with fresh brake fluid to lower edge of filler neck.
3. Attach bleed tube to left front caliper bleed screw and dip the other
end in jar of fresh brake fluid.
4. Start engine and open the bleed screw by 1/2 to 3/4 of turn.
5. Depress foot pedal slowly and fully. After tightening the bleed screw,
allow it to return slowly.
6. Wait for 3-4 seconds before next stroke.
7. Repeat until bubbles stop emanating from bleed tube.
8. Close bleed screw immediately after the last downward stroke of
pedal and hold pedal.
MAINTENANCE & CAR CARE
Clutch & Brakes
Ofrecido por www.electromanuales.com
