114
Head Lamp Bulb Replacement
Raise the bonnet of the vehicle. Unscrew & pull out the rear
protective cover. Pull out the cable socket from the bulb. Remove
locking lever holding the bulb and remove the bulb.
Install new bulb, properly locating it in the housing. Fit back the locking
lever cable socket and rubber cap.
Repeat the same procedure for pencil beam lamp.
Realign Head Lamp after Replacing Bulb
Do not clean or touch the reflector as it will damage the mirror finish
of the surface.
Your vehicle has halogen head lamp bulb and pencil beam bulb one
each on each side. When replacing, handle it by steel base. Protect
the glass from contact with your skin or hard object. If you touch glass,
clean it with denatured alcohol and clean cloth.
NOTICE
Halogen head lamp bulbs get very hot when lit. Oil perspiration or a
scratch on the glass can cause the bulb to overheat and shatter.
HEAD LAMPS
M A I N T E N A N C E
Ajusting Screw
Levelling
motor
adjustment
