TATA Motors nano emax, Owner'S Manual

Page: 28 / 112

26
14. FIRE EXTINGUISHER : DON’TS
1. Do not use water for cleaning Fire
extinguisher. (Use clean cloth for
removing dust)
2. Do not rely on partially used or
discharged Fire extinguisher.
REMOVAL & FITMENT ( FROM
VEHICLE )
Removal : Hold the fire extinguisher
cylinder & lever, slightly pull the fire
extinguisher in the direction as shown
in the image in order to remove it from
clamps.
Location of fire extinguisher
DO’S & DON’TS
DO’S
1. Check pressure gauge needle (1)
periodically.
2. When pressure drops, indicator
needle (1) will shift to the red zone
(2). Immediately contact nearest
TATA MOTORS Authorized
dealer.
3. Ensure that the Fire extinguisher
is always kept at it’s prescribed
position in the vehicle.
4. Get the Fire extinguisher refilled
immediately, after use.
Fitment : Insert and push the body /
neck of the fire extinguisher into the
clamp (1) and ensure that It is
properly seated on the clamp before
running the vehicle.
FIRE EXTINGUISHER
KNOW YOUR CAR
Fire extinguisher is fitted below
dashboard front of centre console.