10
NOTE FOR CONSUMER: Retain for future Reference
This charcoal spit is designed for use OUTDOORS, away from any flammable materials. It is
important that there are
no overhead obstructions
and that there is a minimum distance of 1.5 m
from the side or rear of the appliance. It is important that the ventilation openings of the appliance
are not obstructed. The charcoal spit must be used on a level, stable surface. The appliance
should be protected from direct draughts and shall be positioned or protected against direct
penetration by any trickling water (e.g. rain).
Parts sealed by the manufacturer or his agent must not be altered by the user. No
modifications should be made to any part of this charcoal spit and repairs
Clean your charcoal spit after each USE. DO NOT use abrasive or flammable cleaners, as it will
damage the parts of the product and may start a fire. Clean in warm soapy water.
WARNING: Accessible parts may be very hot. Keep young children away from the hot appliance
at all times (even while cooling down!). It is recommended that protective gloves (eg oven gloves)
be used when handling particularly hot components.
CLEANING AND CARE
OUTSIDE SURFACE
Use mild detergent or baking soda and hot water solution. Non-abrasive scouring powder can be
used on stubborn stains, then rinse with water.
If the inside surface of the barbecue has the appearance of pealing paint, baked on grease build-
up has turned to carbon and is flaking off. Clean thoroughly with strong hot soapy water solution.
Rinse with water and allow to completely dry. NEVER USE OVEN CLEANER.
INTERIOR OF CHARCOAL SPIT BOTTOM
Remove residue using brush, scraper and/or cleaning pad then wash with a soapy water solution.
Rinse with water and allow to dry.
COOKING GRID
Use a mild soapy water solution. Non-abrasive scouring power can be used on stubborn stains
then rinse with water.
How to maintain your charcoal spit
1. Wipe over the stainless steel surface with rusty resistant oil when you storage the charcoal
spit or after used.
