Tasselli PANDA H205, Use And Maintenance Manual

Page: 7 / 68

7
EN
PANDA
USE AND MAINTENANCE MANUAL
428900224 237
2.2.3 Isolating the electricity supply
Before conducting any maintenance work on the equipment or part of it, it is necessary to
section the power supply that powers it
.
Danger
Therefore remember, in the event of maintenance operations in which the operator cannot prevent
accidental closure of the circuit by others, to totally disconnect the appliance from the mains electricity.
2.3 Residual risks
During design the manufacturer examined all the areas or parts at risk. Therefore, all
necessary precautions have been taken to prevent risks to persons
and damage to the appliance as mentioned earlier.
Attention
Periodically check that all safety devices are operating correctly.
Do not remove the fi xed guards.
Do not introduce objects or tools into the work area.
Although the appliance is fi tted with the aforementioned safety devices, there are still some
risks that cannot be eliminated, but reduced via corrective actions by the end user and
correct operational procedures.
Below is a summary of the remaining risks associated with the appliance during:
- Normal operation
- Adjustments and tweaking
- Maintenance
- Cleaning
2.3.1 Risk of contact with live parts
Risk of breaking or damaging the electrical components of the appliance, with a possible
reduction in safety levels, following a short circuit or other events.
Before connecting the electricity supply, make sure there is no ongoing maintenance work.
Attention
Before making the connection, check that the d.c. current in the installation point does not exceed that
indicated on the protections switches present in the electric control board. If this is not the case, the
user must envision the relevant limiting devices.
It is strictly forbidden to conduct any electrical modifi cation, in order to prevent additional unforeseen
hazards and risks.
2.3.2 Fire
Danger
In the event of a fi re, immediately disconnect the master switch from the main power supply line and
move as far away as possible from the appliance.