TASKING iSYSTEM RH850, User Manual

Page: 6 / 16

Operation
A – RH850 Aurora target pinout:
Signal
Direction
Signal Description Signal Pin Pin Signal Signal Description
Signal
Direction
I AGBT TX0_P TX0_P 1 2 Vref Reference Voltage I
I AGBT TX0_N TX0_N 3 4 LPDCLK Debug Clock O
Ground GND 5 6 TMS JTAG O
Reserved 7 8 LPDI Debug Signal O
Reserved 9 10 LPDO Debug Signal I
Ground GND 11 12 nTRST Debug Signal O
Reserved 13 14 FLMD0 Flash Mode O
Reserved 15 16 nEVTI Nexus Event Input O
Ground GND 17 18 nEVTO Nexus Event Output I
Reserved 19 20 FLMD1 Flash Mode
Reserved 21 22 RESETn Reset I/O
Ground GND 23 24 GND Ground
Not Connected NC 25 26 CLK_P AGBT Clock_P O
Not Connected NC 27 28 CLK_N AGBT Clock_N O
Ground GND 29 30 GND Ground
Not Connected NC 31 32 LPDCLKOUT Debug Clock I
Not Connected NC 33 34 Reserved
34-pin ERF8 RH850 target pinout
Blue colored signals are Aurora trace signals.
Signal Direction is described from the BlueBox perspective.
Signal direction definition:
O - Output from the Active Probe to the target microcontroller
I - Input to the Active Probe from the target microcontroller