28
Recovery tank draining pump (optional)
Emptying at a higher lever (e.g. sink):
Clean the recovery tank / solution tank
Recycling filter (optional):
Removing and cleaning the tools
Removing and cleaning the squeegee
swingo 2500
swingo 3500
Cleaning the machine
Storage / parking of machine (machine is idle)
Never store the machine with the tank hood closed.
• Pull out the key and apply the parking brake (refer to page 25).
• Place the draining hose into a sink or bucket.
• Press the recovery tank draining pump button.
The tank will be emptied up to the standpipe, some water will remain.
• Pull out the key and apply the parking brake (refer to page 25).
• Push the driver seat forward so that it rests on the steering wheel, and open
the tank hood.
• Unscrew the tank lid (page 24).
• Clean the recovery tank thoroughly with water.
• Screw the tank lid on with both hands.
• Thoroughly rinse out the solution tank (Flextank) with clean water.
• Remount the solution tank (Flextank) into its place.
• Remove any dirt from the full recovery tank probe.
• Brush the suction filter with a soft brush to remove fluff.
• Take out the recycling filter after every use and clean.
Caution:
Clogged filters reduce the flow of the cleaning solution. As a
consequence you may damage the floor coating.
• Place the recycling filter back in the solution tank (Flextank).
• Pull out the key and apply the parking brake (refer to page 25).
• Lift the tool lightly.
• Turn the left tool clockwise and the right tool
anti-clockwise from the brush unit until they
uncouple.
• Clean the tools with water.
• Pull out the key and apply the parking brake (see page 25).
• Pull the two suction hoses from the squeegee support.
• Press the locking springs together. The
squeegee will thereby be released and can be
removed.
• Clean the squeegee under running water using a brush.
• Hang the squeegee on the tube/hose holder.
• Remove the suction hose from the squeegee.
• Loosen the fixation knobs on the squeegee.
• Dismount the squeegee.
• Clean the squeegee under running water using a brush.
• Hang the squeegee on the tube/hose holder.
Only clean and intact blades will achieve an optimal result!
• Pull out the key and apply the parking brake (refer to page 25).
Caution:
Never clean the machine with high water pressure or a water
hose.
The ingress of water into the machine might cause considerable
damage to mechanical or electrical parts.
• Wipe down the machine with a damp cloth.
We recommend that you disconnect the battery from the machine
using the battery disconnection socket when storing / parking the
machine and when charging the battery.
• Pull out the key and apply the parking brake (refer to page 25).
• Push the driver seat forward so that it rests on the steering wheel, and open
the tank hood.
• Rest the tank hood on the metal support.
The ventilation support keeps the tank cover
slightly open. In this way, the tank is kept dry
and therefore reduces the formation of
unpleasant smells and mould.
Caution:
Never store the machine for longe period with a discharged
battery. The battery could be damaged by this, and may no longer
be functional.
