26
Attach squeegee
swingo 2500
swingo 3500
Filling the solution tank
Dosage:
Only use chemical products recommended by the manufacturer.
The max. filling level in the tank corresponds to the quantity of the dosing aid.
Dosing examples (The concentration is product dependent)
Beginning work
• Raise the tool up to the clutch.
• Turn the left tool anti-clockwise and the right
tool clockwise into the brush unit.
You will feel the tools locate into place, at which
point they are coupled with the unit.
• Pull out the key and apply the parking brake (refer to page 25).
• Hold the squeegee with both hands, and
position it so that the squeegee holding clips (1)
fit into the squeegee cutouts ((2).
• Push the squeegee upwards until you hear the
locking bracker (3) latch into place
• Plug the two suction hoses into the squeegee.
• Loosen the fixation knobs on the squeegee.
• Assemble the squeegee and tighten the fixation
knobs.
• Attach the suction hose to the squeegee.
Caution:
Maximum permissible water temperature 60 °C/140 °F.
• Pull out the key and apply the parking brake (refer to page 25).
• Push the driver seat forward so that it rests on the steering wheel, and open
the tank hood.
• Take the dosing aid out of the solution tank (Flextank).
• Fill the solution btank (Flextank) with water.
The red line on the inside rim of the bag
indicates maximum filling level.
1
1
2
2
3
Caution:
Wear protective gloves, goggles and the corresponding
(protective) work clothing when handling chemical products!
Caution:
Using other chemicals (e.g. chemicals containing solvents,
chlorine, hydrochloric acid and hydrofluoric acid) can damage or
destroy the machine.
Instructions on the product’s
packaging
Tank capacity
The volume per
tank filling
0.5%
50 ml to 10 l
water
95l
475ml = 0.475l
1%
100ml to 10 l
water
95l
950ml = 0,95l
2%
200 ml to 10
lwater
95l
1900ml = 1,90l
3%
500 ml to 10 l
water
95l
4750ml = 4,75l
• Add the product measured with the dosing aid to the water in the solution
tank (Flextank).
• Replace the dosing aid back in the tank.
• Close the tank hood and pull the drivers seat back into position.
Caution:
Always wear non-slip shoes and appropriate work clothing while
working with this machine!
• Switch on the keyswitch.
The display lights up.
The cleaning settings last used will be saved and reloaded until
you change them.
• Unlock the parking brake (refer to age 25).
• Press the suction unit button.
The indicators light up.
• Press the solution button.
The indicators light up.
• Choose the desired amount of solution with +/-
(min. level 1/ max. level 7) .
• Press the brush unit button.
The display lights up.
• Choose the brush pressure by using the +/-
buttons (min. level 1 /max. level 4).
• Choose the driving direction by using the drive /
reverse lever.
Caution:
Take the turning radius into account!
