36
Service, maintenance and care
The maintenance of the machine is a prerequisite for impeccable op
-
eration and a long service life.
Warning:
This machine may only be lifted using lifting gear
(e.g. hoist, loading ramp, etc.).
The heavy weight of the machine, can cause injuries by
lifting.
Caution:
Use original TASKI parts only; otherwise any war
-
ranty and liability claims will be invalidated.
Notice:
In order to rule out unintended machine functions,
the following must always be carried out before
starting maintenance works
- the machine must be switched off,
- the key can be removed.
Service intervals
TASKI machines are high-quality machines that have been inspected
for safety at the factory by authorized inspectors. Electrical and me
-
chanical parts are subject to wear and aging after a longer period of
use.
Notice:
In case of extraordinary use and/or insufficient
maintenance, shorter intervals may be required.
Service center
Please always indicate the type and number of the machine whenev
-
er you contact us to place an order or in case of malfunctions.
You can find this information on the nameplate of your machine. The
address of your closest TASKI service partner is provided on the last
page of these instructions of use.
Blade replacement
• Open the tank cover, carefully push
om the tank cover release [1] and
lower the tank cover [2] until it rests
on the tank.
Legend:
◊ = after every cleaning, ◊◊ = every week,
◊◊◊ = every month, ⊗ = service light
Activity
◊
◊◊
◊◊
◊
⊗
Page
Charge batteries
●
Replenishing distilled water (wet-cell
batteries). Observe the service sheet of
the battery supplier!
●
Draining and cleaning the recovery and
fresh water tanks
●
Clean all parts marked in yellow
●
Clean the brushes
●
Clean the suction nozzle, check the
blades for wear and change them if
necessary
●
Wipe the machine using a damp cloth
●
Clean the gasket of the tank cover,
check for cracks and replace it if neces
-
sary
●
Check HEPA filter and replace it if nec
-
essaey.
●
Maintenance and service program car
-
ried out by Diversey service techni
-
cians
●
1
2
• In order to maintain operational safe
-
ty and readiness for use, the ma
-
chine must be serviced whenever the
maintenance indicator lights up (fac
-
tory setting is 550 working hours) or
at least once a year.
• Unscrew the star knobs (1), pull the blade body (2) out of
the suction nozzle body and remove the blades (3).
• Now you can turn the blades or replace them.
• Put the blade body (2) back in the suction nozzle body and
screw the star knobs (1) back on.
1
2
3
