Taski aquamat 10.1, Instructions Of Use

Page: 39 / 191

37
Malfunctions
Technical data
Malfunction Possible causes Troubleshooting Page
Machine without function
Machine is switched off
• Switch on the main switch
34
No power supply
• Insert the plug into the mains sock
-
et
Main cord defect • Replace the main cord
Motor does not turn • Contact your service partner
No suction or weak suction
Main switch is switched off • Switch on the main switch 34
Motor fault • Contact your service partner
Dirt in the squeegee • Remove the dirt
Cover not correctly put on • Position the cover
Seal faulty or not available • Replace the seal if necessary
Suction hose broken or fitting loose • Replace suction hose or tighten fit
-
ting
Recovery tank full/float has triggered • Turn off the suction motor, empty
and clean tank
Drainage opening/filter blocked
• Empty the tank then clean the
drainage opening/filter
34
Little or no water
Pump switched off • Switch pump on
Spray nozzles blocked • Remove and clean spray nozzles
Spray nozzles removed • Attach or replace spray nozzles
Fresh water filter blocked
• Empty fresh water tank and clean
filter
35
Machine aquamat 10.1
Working width 24 cm
Spray pump 2 x 32 W
Rated voltage 230-240V~ AC
Frequency 50-60 Hz
Rated power, nominal 900 W
Dimensions (LxWxH) 38x38x60 cm
Main cord length 10 m
Maximum weight of operational machine 12.5 kg
Tank ca/- 5% 10 l
Values according to IEC 60335-2-68
Sound pressure level LpA 70 dB(A)
Uncertainty KpA 2.5 dB(A)
Vibration <2.5 m/s2
Uncertainty K 0.25 m/s2
Splash water guard IPX4
Protection class II
EN