©Copyright Task Force Tips LLC 2014-2018
7
LIZ-060 October 26, 2020 Rev03
3.5.2 BOOSTER AND BOOSTER OSC BODY
The Booster body weighs 20.7 lb (9.37 kg), including the clapper (swing check valve), the turbine port plug, the external automatic drain,
and all fasteners that are shared by every Booster model. Dimensions are shown in Figure 3.5.2 below. Portions of the Booster body that
overlap with installed couplings and adapters are excluded from these dimensions. The Booster OSC body weighs 41.1 lb (18.64 kg)
including the clapper (swing check valve), the turbine, the external automatic drain, oscillating components, and all fasteners that are
shared by every Booster OSC model. Portions of the Booster body that overlap with installed couplings and adapters are excluded from
these dimensions.
Figure 3.5.2
3.5.3 SIDE A INLET OPTION (CHARACTER POSITION 3)
The Side A Inlet with no adapter installed is designed for direct connection to the Task Force Tips Industrial Valve Under Monitor (IVUM)
and Hydrant Under Monitor (HUM). Either of these products provide the valve needed to shut off the supply from the Side A Inlet in order
to use an alternate supply of water or foam solution from LDH Inlet Port C3.
The Side A Inlet is also available with a 4” or 3” ANSI 150 flange adapter to allow the booster to be mounted directly on a typical
standpipe or hydrant. In this case, a separate valve must be present to shut off the Side A Inlet when LDH Port C3 is used.
Figure 3.5.3
SIDE A OPTIONS (character position 3)
CHARACTERS WEIGHT (LB)
WEIGHT (KG)
Direct connection to IVUM or HUM (no adapter installed)
H
N/A
N/A
4” ANSI 150 flange inlet adapter
G
7.7
3.5
3” ANSI 150 flange inlet adapter
F
9.0
4.1
12.0"
[304mm]
8.7"
[222mm]
2.7"
[69mm]
Ø6.5”
[165mm]
Ø8.8”
[222mm]
8.8”
[224mm]
0.6”
[14mm]
45°
9.8”
[250mm]
18.0
[458mm]
4.6”
[117mm]
Figure 3.5.2.2
Booster OSC
Body Dimensions
Option H
Direct connection to IVUM or HUM
(no adapter installed)
Option F and G
4" and 3" ANSI 150
Flange Inlet Adapter
2.0
[51mm]
