©Copyright Task Force Tips, Inc. 1999-2017
LIZ-010 December 26, 2017 Rev12
7
3.4 INLET FLANGE OPTIONS
Four diff erent fl ange options are available. Monitor height varies depending on whether the fl ange inner diameter is 4” (100 mm)
or 3” (80 mm), as shown in fi gure 3.4 below. Monitor height is measured from the bottom of the inlet fl ange to the centerline of the
elevation swivel.
Inlet Flange option
3” ANSI 125/150
(also DN80 PN20)
DN80 P16
4” ANSI 150
( also DN100 PN20)
DN100 PN16
Monitor height
(inlet to elevation swivel)
16.2 in (41.1 cm)
16.2 in (41.1 cm)
19.1 in (48.5 cm)
19.1 in (48.5 cm)
Height at +30° elevation
24.7 in (62.7 cm)
24.7 in (62.7 cm)
27.6 in (70.1 cm)
27.6 in (70.1 cm)
Max. height at +80° elevation
31.0 in (78.7 cm)
31.0 in (78.7 cm)
33.9 in (86.1 cm)
33.9 in (86.1 cm)
Fig 3.4
Monitor height with each inlet fl ange option
3.5 OUTLET OPTIONS
Three options are available for the 2.5 inch male threaded outlet:
•
National Hose Thread (NH, also referred to as National Standard Thread)
•
National Pipe Straight Hose (NPSH, also referred to as Iron Pipe Thread)
•
British Standard Pipe Thread (BSP)
3.6 OVERALL DIMENSIONS
11.3"
[288mm]
16.1"
[408mm]
19.1"
[485mm]
80°
27.7"
[703mm]
70°
Maximum flow is 1250 GPM
(4800 L/MIN)
Maximum inlet pressure is
250 PSI (17 BAR)
Fig 3.6
Overall Dimensions
