©Copyright Task Force Tips LLC 2012-2020
7
LIN-060 November 30, 2020 Rev02
4.3 REAR SMOOTH BORE INSERTS
The rear smooth bore inserts may be removed by removing the retaining ring and pulling the insert out the front of the nozzle.
Figure 4.3
4.4 FRONT SMOOTH BORE NOZZLE
Figure 4.4
4.5 FRONT G-FORCE FOG NOZZLE
The Flip Tip with G-Force fog nozzle allows selection between a smooth bore and a fog nozzle. The G-Force for nozzle is available in fixed opening, selectable, or automatic versions. See the G-Force owners manual LIG-010 for details.
Figure 4.5
CAUTION
The lock for the front nozzle is not intended to withstand nozzle reaction force. To reduce the risk of
injury from unintended unlocking due to nozzle reaction, do not use the front nozzle in the down
position as a handle to restrain nozzle reaction.
1-3/8” diameter* if no insert is installed
Smooth bore insert
O-Ring
Retaining ring
(use a pick or similar
tool to remove)
Insert removes in this direction
*1-1/4” models have a diameter of 1-1/4”
and do not accept a rear insert.
Male Hose Thread for attaching a hose
or other nozzle of the proper thread
Smooth bore nozzle
G-Force Fog Nozzle
Rear
Smooth bore insert