Task Force Tips FlipTip, Instruction For Operation And Maintenance

Page: 5 / 12

©Copyright Task Force Tips LLC 2012-2020 5 LIN-060 November 30, 2020 Rev02
3.5 FLOW CHARACTERISTICS
The FlipTip nozzle has fixed orifice sizes. Relationship of flow and nozzle pressure at each orifice size is shown below. If the nozzle is
connected behind a different nozzle, use the flow charts for the outlet nozzle.
Figure 3.0
Flows at specific pressures for each orifice size are as follows:
1/2” TIP 5/8” TIP 7/8” TIP
PRESSURE FLOW REACTION PRESSURE FLOW REACTION PRESSURE FLOW REACTION
PSI GPM LBS PSI GPM LBS PSI GPM LBS
40 47 16 40 73 25 40 144 48
50 53 20 50 82 31 50 161 60
60 58 24 60 90 37 60 176 72
70 62 27 70 97 43 70 190 84
80 66 31 80 104 49 80 203 86
15/16” TIP 1” TIP 1-1/8” TIP
PRESSURE FLOW REACTION PRESSURE FLOW REACTION PRESSURE FLOW REACTION
PSI GPM LBS PSI GPM LBS PSI GPM LBS
40 165 55 40 188 63 40 238 79
50 185 69 50 210 79 50 266 99
60 202 83 60 230 90 60 291 119
70 218 97 70 249 110 70 315 139
80 234 110 80 266 126 80 366 159
1-1/4” TIP 1-3/8” TIP
PRESSURE FLOW REACTION PRESSURE FLOW REACTION
PSI GPM LBS PSI GPM LBS
40 294 98 40 355 119
50 328 123 50 397 148
60 360 147 60 435 178
70 388 172 70 470 208
80 415 196 80 502 237
1/2"
5/8"
7/8"
15/16"
1"
1 1/8"
1 1/4"
1 3/8"
0
1
2
3
4
5
6
7
0
10
20
30
40
50
60
70
80
90
100
0 100 200 300 400 500 600
PRE
SSURE (B
AR)
PRE
SSURE (PSI)
FLOW (GPM)
0 500 1000 1500 2000
FLOW (LPM)