©Copyright Task Force Tips LLC 2002 - 2019
LKB-200 July 29, 2018 Rev01
TASK FORCE TIPS LLC
MADE IN USA • tft.com
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
10.0 INSPECTION CHECKLIST
BEFORE EACH USE
, the nozzle must be inspected for proper operation and function according to this checklist:
1.
There is no obvious damage such as missing, broken or loose parts, corrosion, damaged labels, etc.
2.
The waterway is clear of obstructions
3.
Coupling is tight and leak free
4.
Gaskets are in good condition
5.
Shaper or Index ring moves smoothly to all positions including fl ush (if applicable)
6.
Nozzle fl ow is adequate as indicated by pump pressure and nozzle reaction
7.
Shaper detent (if so equipped) operates smoothly and positively
8.
Nozzle moves smoothly in and out of fl ush position (if applicable)
9.
There is no damage to the nozzle tip
10. The shut off valve (if so equipped) operates as designed and shuts the fl ow off completely
BEFORE BEING PLACED BACK IN SERVICE
, nozzles must be inspected to this checklist;
1.
All controls and adjustments are operational
2.
Shut off valve (if so equipped) closes off the fl ow completely
3.
There are no broken or missing parts
4.
There is no damage to the nozzle
5.
The thread gasket is in good condition
6.
The waterway is clear of obstructions
7.
Nozzle is clean and markings are legible
8.
Coupling is retightened properly
9.
Shaper is set to desired pattern
NFPA 1962: Standard for the care, use, inspection, service testing, and replacement of
fi
re hose, couplings, nozzles and
fi
re hose appliances.
(2013 ed., Section 5.5.4). Quincy, MA: National Fire Protection Agency.
WARNING
Any nozzle failing any part of the inspection checklist is unsafe and must have the problem
corrected before use. Operating a nozzle that fails any of the above inspections is a misuse of
this equipment.
