background image

©Copyright Task Force Tips LLC   2002 - 2019 

LKB-200 July 29, 2018 Rev01

MANUAL: ER Bubble Cup

®

 Nozzles

INSTRUCTIONS FOR INSTALLATION, SAFE OPERATION AND MAINTENANCE

WARNING

Understand manual before use. Operation of this device without understanding the manual and 
receiving  proper  training  is  a  misuse  of  this  equipment.  Obtain  safety  information  at  tft.com/
serial-number

This instruction manual is intended to familiarize fi refi ghters and maintenance personnel with the operation, servicing and 
safety procedures associated with the ER Bubble Cup fi re fi ghting nozzles.

This manual should be kept available to all operating and maintenance personnel.

TASK FORCE TIPS LLC

MADE IN USA • tft.com

3701 Innovation Way, Valparaiso, IN 46383-9327 USA

800-348-2686 • 219-462-6161 • Fax 219-464-7155

ER BUBBLE CUP

DANGER

PERSONAL RESPONSIBILITY CODE

The  member  companies  of  FEMSA  that  provide  emergency  response 
equipment  and  services  want  responders  to  know  and  understand  the 
following:

1. Firefi ghting and Emergency Response are inherently dangerous activities 

requiring proper training in their hazards and the use of extreme caution 
at all times.

2. It  is  your  responsibility  to  read  and  understand  any  user’s  instructions, 

including  purpose  and  limitations,  provided  with  any  piece  of  equipment 
you may be called upon to use.

3. It  is  your  responsibility  to  know  that  you  have  been  properly  trained  in 

Firefi ghting and /or Emergency Response and in the use, precautions, and 
care of any equipment you may be called upon to use.

4. It is your responsibility to be in  proper physical condition and to maintain 

the  personal  skill  level  required  to  operate  any  equipment  you  may  be 
called upon to use.

5. It  is  your  responsibility  to  know  that  your  equipment  is  in  operable 

condition and has been maintained in accordance with the manufacturer’s 
instructions.

6. Failure  to  follow  these  guidelines  may  result  in  death,  burns  or  other 

severe injury.

FEMSA

Fire and Emergency Manufacturers and Service Association

P.O. Box 147, Lynnfi eld, MA  01940 • www.FEMSA.org

Summary of Contents for ER Bubble Cup













Reviews: