Page 8 of 22
Chapter 3:
EVIDENCE.com Dock Installation
Introduction
Installing your EVIDENCE.com Dock consists of several steps, to be followed in order.
Step 1:
Accept the EVIDENCE.com Administrator Invitation
Ensure that you know your username, password, and agency domain name.
This email invitation will come from [email protected].
If you do not accept the invitation, you will not be able to complete
EVIDENCE.com Dock setup.
Step 2:
Device Placement
1.
Take the EVIDENCE.com Dock out of the box and confirm that all pieces are
present.
2.
Connect your core to all bays you plan to use (Figure 7).
Note:
Do not attach more than 5 individual bays or 1 6-bay to 1 core.
Figure 7 Core and Individual Bay
CAUTION
Do not attach more than 5 individual bays to a core. The system will not provide
power to more than 5 individual bays. AXON cameras in any extra bays will not
upload any data to EVIDENCE.com and AXON devices in any extra bays will not be
recharged.
3.
Place the connected EVIDENCE.com Dock on a flat surface, away from heat
sources and direct sunlight.
See “Wall Mounting an EVIDENCE.com Dock” on Page 20 for additional
information on utilizing the Wall Mount.
4.
Place the Dock within reach of appropriate power and Ethernet connections.
