TS-304UHF RFID User Manual
UHF RFID User Manual
5
2
、②：
GPIO1, ON Status, GPIO1 is low level.
3
、③④：
TCP/IP, ON Status is TCP/IP communication.
4
、⑤⑥：
Blank.
5
、⑦⑧：
RS232, ON Status is RS232 communication.
2.1.4 Step 4: Operating Reader via Demo
Launch the supplied Demo. This software don’t need to installation. Just put the
UHFDemo.exe
,
reader.dll
,
customControl.dll
into the same folder, and double-click
UHFDemo.exe
to run the software.
Launch the UHF Demo application, the following screen displays:
Please select
RS232
in
Connection
if the reader is connected via RS -232 port. Selecting the
corresponding
Serial Port
number and
Baudrate
, default baudrate is 115200. As illustrated
below:
Click on
Connect
, if the port isn’t occupied, the
Operation History
will displays:
