Tasco TA430D, Instruction Manual

Page: 14 / 24

Infrared Refrigerant Leak Detector
12
mode which is only for the sensitivity H/M/L level.
Press the “Auto” button once to enable manual
Reset function.
Note: At High sensitivity Level: To use
auto-balance off mode, the tester needs heating
up time more than 3 minutes after turning on, then
turn off the Auto-Balance. Proper background level
setting needs to be considered.
 Turbo Button
Press the Turbo Button to detect the highest
sensitivity at 3g/year.
 Button
To select Sensitivity Level at High or Medium or
Low.
The default sensitivity level is set at High.
 Peak Hold Button
The Peak Hold function holds the highest change in
concentration achieved while continuing to detect
leaks. Press
Peak Hold button to toggle this
function on and off .

Mute Button
If the environment requires silence during leak
detection work, the user may press
MUTE button