Infrared Refrigerant Leak Detector
8
6. GETTING STARTED
6-1 Installing Batteries
Loose the screw and remove the battery
compartment door located on the bottom of the
instrument as show below (Fig.1).
Install Lithium-ion battery pack.
Reinstall the battery cover by aligning it with the
handle.
When the battery is nearing the end of their useful life,
the
red LED low battery indicator will
flash. The battery should be recharged as quickly as
possible.
6-2 Charging
When the battery is being charging, the
red LED low battery indicator will light up. It will be off
after charging is completed.
6-3 Lithium Battery Care
The Infrared Refrigerant Leak Detector contains a very
powerful Lithium-ion battery. For a
long
battery life and
safe operation, you must observe the following:
CAUTION!
(1) Do not short-circuit battery.
(2) Do not reverse connect.
(3) Do not disassemble or reconstruct battery.
