background image

8

PCI-822 User’s Guide

Updating the PCI-822 Software

in Windows

You can download the latest version of the PCI-822 software from the

TASCAM web site. To install the latest version of the software:

1.  Go to the web site (http://www.tascam.com) and download the latest

software, which is contained in a compressed (zip) file. If necessary,
you can also download a copy of WinZip (from http://www.winzip.com).

2.  Insert a blank, formatted floppy disk into your computer’s floppy drive.

3.  Open the zip file, and extract the enclosed PCI-822 files onto a floppy

disk (and then leave the disk in the floppy drive).

4.  Open the Windows Control Panel (Start

g

Settings

g

Control Panel), and

double-click the System icon.

5.  When the System window appears, select the “Device Manager” tab.

6.  Click the ‘+’ next to “Sound, video, and game controllers” to open that

part of the device tree.

7.  Select “PCI-822 Wave and MIDI Driver,” and click ‘Properties.’

8.  When the PCI-822 Properties window appears, select the “Driver” tab.

9.  Click the ‘Update Driver…’ button, and follow the wizard’s instructions,

letting Windows search for the best driver for your device.

Summary of Contents for PCI-822























































Reviews: