Tascam MX-2424 Owner'S Manual Download Page 47

Page: 47 / 67

790

SCSI ID’s Mounted

This is a display indication only of the SCSI ID number of drives that are currently mounted on the MX-2424.

Menu Bank 800: Project

800

Project Name

From this Menu it is possible to create a new Project simply by creating a new and unique file name. As soon as

audio is recorded for a new Project, audio file directories will be automatically created. To access this Menu

directly, press

SHIFT [19]

then

PROJ<NEW> [45]

. If a project is already loaded into the MX-2424 a new project

name will automatically be created that is the same as the loaded project with an additional numerical suffix.

810

Track Prefix

Whenever new audio events are created by the MX-2424 this user-definable default prefix will become part of the

Event Name. This prefix may not exceed 7 characters. If a prefix longer than 7 character is attempted any

characters above the 7

will be truncated.

820

File Prefix

Whenever new audio files are recorded by the MX-2424 this user-definable default prefix will become part of the

File Name.

Menu Bank 900: System

900

Store Settings

This Menu allows the current MX-2424 configuration to be stored to one of eleven User Presets. All Menu settings

are stored into these User Presets. The possible choices are:

User 1 – 10

Memory locations for storage of User Preset configurations.

User Default

If there is something stored to this location then it will be used as the default setting at

power up. If nothing is stored here then the factory default setting will be used.

901

Recall Settings

This Menu allows stored configurations to be recalled to become the current MX-2424 configuration. The possible

choices are:

User 1 – 10

Memory locations for storage of User Preset configurations.

User Default

If there is something stored to this location then it will be used as the default setting at

power up. If nothing is stored here then the factory default setting will be used.

Factory Default

Factory Default Settings

910

Set Date

This Menu Utility allows the system date to be set using the

TRIM

key and the numerical keypad.

911

Set Time

This Menu Utility allows the system time to be set using the

TRIM

key and the numerical keypad. The time is

entered in 24-hour format.

Summary of Contents for MX-2424




































































Search results

Summary of Contents for MX-2424

Reviews:

Related manuals for MX-2424

Brands by name

Popular brands

Tascam MX-2424, Owner'S Manual

Search results

Summary of Contents for MX-2424

Reviews:

Related manuals for MX-2424

Brands by name

Popular brands