[27]
LOCATE/LENGTH
Pressing
LOCATE
[27]
will send the play head to the time code value displayed in the bottom portion of the
LCD
[18]
.
Pressing
<SHIFT> [19]
then
LOCATE<LENGTH> [27]
will display the amount of time between the In and Out
points.
TO/PREV/REF
[28]
From the MX-2424
Pressing
TO [28]
then
IN [30]
will play up to the In point and stop (using the pre-roll amount determined in Menu
212). Pressing
TO [28]
then
OUT [31]
will play up to the out point and stop (using the pre-roll amount determined
in Menu 212). In either case the play head will return to the pre-roll position for the IN or OUT point (depending on
which one was pressed). If the stored pre or post roll time is less than one second, this operation will still use one
second for the value.
Pressing
<SHIFT> [19]
then
TO<PREV> [28]
will locate the Play Head to the beginning of the previous audio
event boundary on any track. If a track is in Edit mode then only that track’s audio event boundaries will be used by
this function.
[67,75]
From the RC-2424
Pressing
TO [67]
then
IN [69]
will play up to the In point and stop (using the pre-roll amount determined in Menu
212). Pressing
TO [67]
then
OUT [70]
will play up to the out point and stop (using the pre-roll amount determined
in Menu 212). In either case the play head will return to the pre-roll position for the IN or OUT point (depending on
which one was pressed). If the stored pre roll time is less than one second, this operation will still use one second
for the value.
Pressing
PREV [75]
will locate the Play Head to the beginning of the previous audio event boundary on any track.
If a track is in Edit mode then only that track’s audio event boundaries will be used by this function.
Pressing
<SHIFT> [19]
then
PREV<REF> [75]
will provide access the Master Machine Reference Sync Point
Memory Location. (For more information please see the
TL-Sync
Manual.)
FROM/NEXT/SYNCP
[29]
From the MX-2424
Pressing
FROM [29]
then
IN [30]
will play from the In point and stop (using the post-roll amount determined in
Menu 213). Pushing
FROM [29]
then
OUT [31]
will play from the out point and stop (using the post-roll amount
determined in Menu 213). In either case the play head will return the IN or OUT point plus any pre-roll (depending
on which one was pressed). If the stored post roll time is less than one second, this operation will still use one
second for the value.
Pressing
<SHIFT> [19]
then
FROM<NEXT> [29]
will locate the Play Head to the beginning of the next audio
event boundary on any track. If a track is in Edit mode then only that track’s audio event boundaries will be used by
this function. When using this function
<SHIFT> [19]
will stay lit allowing additional
NEXT
operations without
the need to press
<SHIFT> [19]
again.
[67,75]
From the RC-2424
Pressing
FROM [68]
then
IN [69]
will play up from In point and stop (using the post-roll amount determined in
Menu 213). Pushing
FROM [68]
then
OUT [70]
will play from the out point and stop (using the post-roll amount
determined in Menu 213). In either case the play head will return to the IN or OUT point plus any pre-roll
(depending on which one was pressed). If the stored post roll time is less than one second, this operation will still
use one second for the value.
25
Summary of Contents for MX-2424
