Tascam MD-801RmkII Owner'S Manual Download Page 5

 

1 - Care of MD media

 

1–2

 

 TASCAM MD-801R/P Mk II

 

disk from the user, and a file appears as one contigu-
ous block of data (even though it may be spread over 
many tracks and sectors of the disk), the MD player 
allows separated audio data to appear as a continuous 
audio track.

The MD-801 allows the creation and reading of a 
User Table of Contents (U-TOC) on recordable 
discs, which contain instructions to the player on the 
logical arrangement of the tracks, where to find the 
next audio segment to be played, etc. This is similar 
to the directory tracks provided as part of a computer 
disk operating system.

The random access facilities provided by the MD-
801 are significantly better than those to be found on 
consumer MD decks. The effective start time can be 
effectively zero, compared with hundreds of milli-
seconds on consumer units.

 

1.1.4 Track titling, etc.

 

In common with other forms of digital audio media, 
the MD medium allows other data to be recorded 
alongside the audio data. In the MD medium, this is 
used to provide alphanumeric disc and track titles, 
which are shown on the display of the player.

In the case of the MD-801R/P Mk II, this information 
may be conveniently entered through a standard 
computer keyboard (PS/2 compatible), or through the 
controls of the main unit.

In addition, a realtime clock allows date- and time-
stamping of tracks recorded on the unit or created or 
edited through TOC editing functions.

These times will be displayed when the disc is 
replayed on any one of the MD-801 series.

 

1.2 Care of MD media

 

The MD medium has been designed to be robust, and 
the integration of the disc into a cartridge protects the 
recorded surface from the worst effects of dust, fin-
gerprints, and scratches.

Even so, there are some commonsense precautions 
that you should take when storing and handling 
MiniDiscs.

• Do not open the shutter and touch the surface of the 

disc.

• Do not keep MiniDiscs in excessively dusty loca-

tions, in direct sunlight, in areas subject to high 
temperatures, or high levels of humidity.

• If the cartridge becomes dirty, clean it with a dry, 

soft cloth. Do not use any solvents or other liquids.

 

1.3 About the MD-801R/P Mk II

 

The MD-801R/P Mk II, based on the TASCAM MD-
801 series of MD recorder/players, and designed to 
meet the requirements of audio professionals, 
includes the following features:

• Full editing functions to divide, erase and combine 

tracks, etc.

• Auto cue function, allowing the playback point to 

be automatically cued to the first frame of a track, 
using a selectable sensitivity level

• Auto ready function, allowing the playback point 

to be “parked” in the play ready mode at the start of 
each track

• A resume function, which holds in backup memory 

the point where playback stopped, or the power 
was disconnected

• Incremental play mode, allowing cueing of the 

playback point to the start of the next track, as 
determined by a selectable audio threshold level, 
when playback is stopped

• “Soft mute” eliminates clicks, etc. when pausing 

and restarting playback

• Dual time display

• Three playback modes: normal (whole disc), track 

play, and A-B play (between two defined points)

• 3-point autolocation facility

• Repeat (disc, track, A-B)

• Either stereo or monaural playback may be 

selected

• Pitch change ±9.9% in 0.1% steps

• Shuttle operations up to 100 x normal speed, and 

jog to single-frame accuracy

• Digital outputs in COAXIAL (SPDIF) and AES/

EBU

• Word clock synchronization for inclusion of the 

MD-801 in an all-digital audio setup

• Two sets of analog outputs: –10 dBV unbalanced 

 

MONITOR

 

 (RCA) and +4 dBu balanced 

 

LINE

 

 

(XLR-type). The 

 

LINE

 

 outputs may be trimmed 

for precise signal matching with other equipment

• Output selectable (using remote controllers) from 

either 

 

MONITOR

 

 or 

 

LINE

 

• High-quality DA convertor for optimum analog 

audio quality

• Level 4.5 ATRAC system

• PS/2-compatible computer keyboard connector 

allows titling and other remote control operations 

Summary of Contents for MD-801RmkII






























Reviews: