Tascam M-300 Series, Operation & Maintenance Manual

Page: 83 / 167

1-7.
PGM OUT/TAPE RTN MONITOR
SYSTEMS
1)
PGM OUT Monitor System
(PGM --> STEREO OUT L
&
R)
With the level at the
PGM
OUT 1
-
4 jacks set to
nominal level ( see paragraph 1 -4. 9) I. pr ess the
monitor ON switch, situated in the TAPE RTN
monitor control rack (green
LED
lights). By
adjusting the TAPE RTN PAN and LEVEL
pots (Stereo Master Faders should be in the
shaded area as set in paragraph 1 - 1 1, confirm
that the STEREO OUT jacks provide nominal
levels indicated in the table in paragraph 1 -6.
,·�.�
<'I"> *il
I_,... U-.1
1 - 9
Monitor O N switches 1 and 5 select the PGM
OUT 1,
mo
nitor
ON
switches 2 and 6 the
PGM
OUT
2, monitor
ON
switches 3 and 7 the
PGM OUT
3, and monitor
ON
switches 4 and 8
the
PGM OUT
4.
2) TAPE RTN Select Switch
Connect a -10 dBV, 1 k Hz signal to the TAPE
IN
jacks and confirm that the
STEREO
OUT
source switches from
PGM OUT
to
TAPE IN
when the
TAPE RTN
select switch
is
depressed.
10 ....
1
f."�T! ��.T�I'_ i
!··-·