Tascam M-300 Series, Operation & Maintenance Manual

Page: 60 / 167

VOLTAGE CONVERSION
This mixer
is adjusted
to operate on the e
l
ec
t
ric
voltage specified on the packing carton.
Note: This voltage conversion is not possible on
models sold in the U.S.A. and Canada,
U.K., Australia or Europe.
For general export units, if it is necessary to
change the voltage requirements of this mixer to
match your area, use
the following
procedures.
ALWAYS D ISCONNECT POWE R LINE CO RD
BEFORE MAKING THESE CHANGES.
B
'
e!l
60
1 . Turn
the mixer upside-down on a soft surface.
2. Remove screws A (two) and B (quantity of
B differs a
m
o
n
g
m
od
e
ls
)
.
3. Remove t
h
e p
a
ne
l
.
4. L
oc
at
e
the voltage selector plug near the
transformer inside the unit.
5. Pull out the plug and reinsert it so that the
d
es
i
red voltage can be read through the cut·
out window of the plug.
6. Replace the panel.
A
61