TASCAM IF-FW/DM Owner's Manual
SETUP ........................................7
IF-FW/DM Interface Setup ...............7
CUBASE / NUENDO .....................7
SONAR ..........................................7
LOGIC ...........................................7
DIGITAL PERFORMER .................7
SYSTEM CLOCKING ........................8
MASTER CLOCK ..........................8
CLOCK SETTINGS .......................8
96 k & 88.2 k Operation ............8
IF-FW/DM & MIXER ROUTING ........8
MIXER OUTPUTS .........................8
DM-3200 ...................................8
DM-24 .......................................9
MIXER INPUTS .............................9
DM-3200 ...................................9
DM-24 .......................................9
THE IF-FW/DM CONTROL PANEL
(WINDOWS) ................................10
ENABLE WDM ............................11
Table of contents
INTRODUCTION .......................2
FEATURES ........................................3
SYSTEM REQUIREMENTS ..............3
Macintosh .....................................3
Windows .......................................3
DM-3200 Requirements ...............3
DM-24 Requirements ...................3
Trademarks ...................................3
INSTALLATION ..........................4
CONFIGURE FOR YOUR MIXER .....4
INSTALLING THE IF-FW/DM ............4
MAKING CONNECTIONS .................5
CONFIGURING THE COMPUTER ....5
Macintosh .....................................5
Windows .......................................6
Windows 64-Bit ............................6
Thank you for purchasing the TASCAM
IF-FW/DM FireWire audio card for
TASCAM mixers. It is designed to provide
audio and MIDI interfacing between your
TASCAM mixer and your computer based
DAW, essentially turning your TASCAM
mixer into a FireWire audio/MIDI interface.
Please take some time to look through this
Owner’s Manual and familiarize yourself
with the IF-FW/DM’s features, setup and
operation. We suggest you pay particular
attention to the setup notes for your com-
puter platform of choice (Mac or PC). You
may also need to refer to your software’s
documentation for a clear understanding of
how to set up an audio/MIDI interface from
within your software. Your experience with
the IF-FW/DM will be greatly enhanced by a
good working knowledge of your audio soft-
ware.
Be sure to check the TASCAM web site at
www.tascam.com
to ensure you have the
latest software updates for your IF-FW/DM.
Introduction
