TASCAM HD-R1 RS-232C Protocol Specifications
9
TEAC
Corporation
4.2 Setting commands
Most of the HD-R1’s settings can be configured remotely. Their parameter IDs and acceptable values are defined in
the following tables. With some exceptions, all parameters may both be set and queried with a command. Although
they are not case sensitive, blank spaces within parameter IDs and setting values must be exactly as shown.
The format for setting commands is the same as for others as shown in the example below.
Parameter ID
Command
Setting value
End Marker
Character
string
Auto Cue (example)
=: set value
?: query
<Value>: as necessary
LF (or CR+LF)
The following can be set and queried at any time.
Parameter ID
Valid values
Num Of Folders
Total number of folders (query only)
Num Of Playlists
Total number of playlists (query only)
Repeat
Off
On
Auto Ready
Off
On
Auto Cue
Off
-72 dBFS
-66 dBFS
-60 dBFS
-54 dBFS
-48 dBFS
-42 dBFS
-36 dBFS
-30 dBFS
-24 dBFS
Channels
Mono Left
Mono Right
Mono Summed
Stereo
WAV Sample Width
16 Bits
24 Bits
