22
TASCAM DR-44WL
4 – Recording
DELAY setting
Correct a time delay that occurs when the built-in microphones
are far away from an external microphone.
1. Press the INPUT button to show the
INPUT
SETTING
screen.
2. Press a TRACK/INPUT button to open the
INPUT
SETTING
screen for that channel (track) to set its
DELAY
item.
3. Using the wheel select (highlight)
DELAY
and press the
ENTER/MARK or
/
button.
INPUT
SETTING
screen Tr1 display when in 4CH mode
4. Use the wheel to set a value according to the distance of the
connected microphone.
Options:
0ms
(0m)
(default value) to
300ms
(103m)
5. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
6. Once the setting has been completed, press the
8
/HOME
button to return to the Home screen.
Set the low-cut filter
The low-cut filter can reduce noise such as offensive wind noise
from air-conditioners and projectors.
1. Press the INPUT button to show the
INPUT
SETTING
screen.
2. Press a TRACK/INPUT button to open the
INPUT
SETTING
screen for that channel (track) to set its
low-cut filter.
3. Using the wheel select (highlight)
LOW
CUT
and press the
ENTER/MARK or
/
button.
INPUT
SETTING
screen Tr1 display when in 4CH mode
4. Use the wheel to set the cut-off frequency of the low-cut
filter.
Options:
OFF
(default value),
40Hz
,
80Hz
,
120Hz
,
220Hz
5. Press the ENTER/MARK button to confirm the setting and
enable selection of other setting items.
6. Once the setting has been completed, press the
8
/HOME
button to return to the Home screen.
NOTE
LOW
CUT
can be set or changed even during recording
standby.
