background image

TASCAM  DR-44WL

 

15

3 – Preparation

CAUTION

• 

Do not remove the SD card from the unit during recording, 

playback or at other times when it is being accessed.

• 

Do not remove the SD card from the unit when it is 

connected to a computer via USB.

• 

SD cards that meet SD, SDHC or SDXC standards can be used 

with this unit.

• 

A list of SD cards that have been confirmed to work with 

this unit can be found on the TEAC Global Site (

http://

teac-global.com

).

• 

When using a microSD card in an SD card adapter, do not 

remove just the microSD card. Always remove the adapter 

with the microSD card in it. Removing only the microSD card 

could cause malfunction. 

SD card write protection switches

An SD card comes equipped with a write protect switch.

Unprotected

Protected

If you slide the protect switch to the LOCK position, file 

recording and editing is not possible. Move the switch to the 

unlocked position in order to record, erase and otherwise edit 

data on the card.

Preparing an SD card for use

In order to use an SD card in this unit, you must format it first.
1.  Confirm that an SD card is installed and turn the power ON.
2.  The following message appears when a new card or a card 

formatted by another device is inserted into the unit.

SD/SDHC card

SDXC card

3.  Press the ENTER/MARK button to start formatting.

CAUTION

Formatting an SD card erases all the data on it.

4.  When formatting is complete, it will return to the Home 

screen. You may format the card whenever required.

CAUTION

When formatting the SD card, make sure the unit is 

connected to the dedicated AC adapter (GPE053B) included 

with the unit, a computer via USB bus power, or fully-

charged batteries.

Turning the built-in speaker on/off

The factory setting for the built-in speaker output is selected as 

ON. To turn it off, open the 

TOOLS

 screen and select 

OFF

 for 

the 

SPEAKER

 setting.

1.  Press the MENU button to open the 

MENU

 screen.

2.  Using the wheel, select (highlight) 

TOOLS

 menu item and 

press the ENTER/MARK or 

/

 button.

TOOLS

 screen appears.

3.  Using the wheel, select (highlight) 

SPEAKER

 and press 

the ENTER/MARK or 

/

 button.

4.  Using the wheel, turn on or off and press the ENTER/MARK 

button.
Options: 

OFF

ON

 (default setting)

5.  Once the setting has been completed, press the 

8

/HOME 

button to return to the Home screen.

NOTE

In a recording standby or recording mode, or when a 

headphone or a speaker system is connected to the 

DR-44WL, the built-in speaker will not emit sound even 

when the 

SPEAKER

 setting is 

ON

.

Connecting a monitor device

To listen with a headphone, connect it to the   /LINE OUT jack.
External monitor system (powered monitor speaker or an 

amplifier and speaker): connect the external monitor system to 

the   /LINE OUT jack.

Summary of Contents for dr-44wl































































Reviews: