TASCAM DR-40
41
4 – Recording
STEREO MODE/DUAL MODE/OVERDUB SEPARATE MODE: 1/2 button
4CH MODE/OVERDUB MIX MODE: 3/4 button
• Press the
(
HOME
) [
8
]
button to exit recording standby.
• When in recording standby or during recording, the speaker
does not output sound even if the
SPEAKER
setting is enabled.
Connect headphones to the /LINE OUT jack if you want to
adjust the level or record while monitoring the input. Use the
+ or − button in the Home Screen to adjust the monitoring
volume. This does not affect the sound to be recorded.
Independent L/R channel EXT IN input level
setting function
You can set the EXT IN input levels for the left and right
channels independently. Use this function when, for example,
using two different mics or when volume differences are great.
1 Press the REC MODE button to open the REC MODE
screen.
2 Use the + and − buttons to select SOURCE (or EXT IN in
4CH MODE) and press the ENTER/MARK or
/
button.
3 Use the + and − buttons to set the input source to EXT
INDEP.
4. Press the HOME button to return to the Home Screen.
5. Press the RECORD [
0
] button to enter recording standby.
6. Press an INPUT LEVEL (+/−) button on the left side of
the unit to open a pull-up with a meter showing the
input level setting at the bottom of the display.
7. To set the input level for the other channel (L/R), press
one of the following buttons.
STEREO MODE/DUAL MODE/OVERDUB SEPARATE MODE:
1/2 button
4CH MODE/OVERDUB MIX MODE: 3/4 button
NOTE
• If the input selection (SOURCE or EXT IN) on the REC MODE
screen is set to EXT IN 1/2, the EXT IN input level will affect
the both L/R channels.
• If you apply an effect to the input sound and the SOURCE
item on the EFFECT screen is set to EXT IN or INT MIC, sound
from both left and right channels will be included in the
effect sound. In other words, sound from the opposite
channel will be included in the recorded result.
