20
TASCAM DR-40
2 – Names and Functions of Parts
0
File name
This shows the file name that is automatically assigned to
a recording file.
The project name is shown when multiple files have been
recorded in 4-channel recording mode, dual recording
mode or OVERDUB SEPARATE mode.
q
Remaining recording time
The remaining recording time until the selected max file
size is reached appears in hours: minutes: seconds.
If the remaining recording time on the card is less than the
remaining time until the selected max file size is reached,
the remaining recording time on the card is displayed.
w
Low cut filter status
This shows whether the low cut filter is ON/OFF. The icon
appears highlighted when set to
40Hz
,
80Hz
or
120Hz
.
: Low cut filter off
: Low cut filter on
e
Level control function status
: Level control off
: Peak reduction on
: Automatic level control on
: Limiter on
r
Effect status
Shows whether the effect function is ON or OFF.
: Effect off
: Effect on
t
Peak value in decibels (dB)
Peak input level values are shown digitally.
y
Auto tone function status
This icon appears when the auto tone function is on.
No icon: Auto tone off
:Auto tone on
Playback Control screen
The Playback Control screen is displayed if the PB CONT
button is pressed during playback or when playback is
stopped.
1
Loop playback status
The icon is displayed when loop playback is enabled.
2
Playback speed
