TASCAM DR-40
15
2 – Names and Functions of Parts
Bottom Panel
;
Mono speaker
Use this built-in speaker to listen to recordings.
The speaker will not produce sound in the following
situations.
• When in recording standby
• When headphones are connected
• When recording
• When the speaker output setting is off
• When in overdubbing mode
z
Mounting thread for tripod or tilt foot (1/4-inch)
Use this to attach a tripod or the included tilt foot to the
recorder.
CAUTION
• Tighten the unit securely to the tripod or microphone stand
to prevent it from falling off.
• Place the tripod or microphone stand on a level surface
when using it with this unit.
x
Battery compartment cover
When not using the included tilt foot, it can be stored by
inserting it between the two protrusions on the inside of
the battery compartment cover.
c
Hole for strap
