background image

2

 

TASCAM  DR-07

IMPORTANT SAFETY PRECAUTIONS

CAUTION:  TO  REDUCE  THE  RISK  OF 
ELECTRIC  SHOCK,  DO  NOT  REMOVE 
C O V E R   ( O R   B A C K ) .   N O   U S E R -
SERVICEABLE  PARTS  INSIDE.  REFER 
SERVICING  TO  QUALIFIED  SERVICE 
PERSONNEL.

The  lightning  flash  with  arrowhead 
symbol,  within  equilateral  triangle,  is 
intended to alert the user to the presence 
of uninsulated “dangerous voltage” within 
the  product’s  enclosure  that  may  be  of 
sufficient magnitude to constitute a risk of 
electric shock to persons.

T h e  e x c l a m a t i o n  p o i n t  w i t h i n  a n 
e q u i l a t e r a l  t r i a n g l e  i s  i n t e n d e d  t o 
a l e r t  t h e  u s e r  t o  t h e  p r e s e n c e  o f 
important  operating  and  maintenance 
(servicing)  instructions  in  the  literature 
accompanying the appliance.

WARNING: TO PREVENT FIRE OR 

SHOCK HAZARD, DO NOT EXPOSE 

THIS APPLIANCE TO RAIN OR 

MOISTURE.

FOR U.S.A.
TO THE USER
This equipment has been tested and found 

to  comply  with  the  limits  for  a  Class  B 

digital  device,  pursuant  to  Part  15  of  the 

FCC  Rules.  These  limits  are  designed  to 

provide  reasonable  protection  against 

h a r m f u l  i n te r fe r e n c e  i n  a  r e s i d e n ti a l 

installation.  This  equipment  generates, 

uses,  and  can  radiate  radio  frequency 

energy  and,  if  not  installed  and  used  in 

accordance  with  the  instruction  manual, 

may  cause  harmful  interference  to  radio 

communications.  However,  there  is  no 

guarantee  that  interference  will  not  occur 

in a particular installation. If this equipment 

does  cause  harmful  interference  to  radio 

o r  te l ev i s i o n  r e c e p t i o n,  w h i c  c a n  b e 

determined  by  turning  the  equipment  off 

and  on,  the  user  is  encouraged  to  try  to 

correct  the  interference  by  one  or  more  of 

the following measures.
a)  Reorient or relocate the receiving antenna.
b)  Increase  the  separation  between  the 

equipment and receiver.

c)  Connect  the  equipment  into  an  outlet 

on a circuit different from that to which 

the receiver is connected.

d)  Consult  the  dealer  or  an  experienced 

radio/TV technician for help.

CAUTION

C h a n g e s   o r   m o d i f i c a t i o n s   t o   t h i s 

equipment  not  expressly  approved  by 

TE AC  CORPOR ATION  for  compliance 

could  void  the  user's  authority  to  operate 

this equipment.

Turn  the  power  off  when  on  an  aircraft, 

because  there  is  a  danger  of  this  device 

interfering  with  the  safe  navigation  of  the 

aircraft.

Declaration of Conformity

Model Number: DR-07
Trade Name: TASCAM
Responsible party:  TEAC AMERICA, 

INC.
Address: 7733 Telegraph Road, 

Montebello, 

 

  California, U.S.A.

Telephone number: 1-323-726-0303
This device complies with Part 15 of the 

FCC  Rules.  Operation  is  subject  to  the 

following two conditions: (1) this device 

may  not  cause  harmful  interference, 

and  (2)  this  device  must  accept  any 

i n t e r f e r e n c e  r e c i e v e d ,  i n c l u d i n g 

interference  that  may  cause  undesired 

operation.

Summary of Contents for DR-07

































Reviews: