TASCAM DR-05
25
Powering the unit
DR-05 can operate on two AA batteries, or through
an optional AC adapter (TASCAM PS-P515U) or USB
cable provided with the unit (USB bus power).
Alkaline or Ni-MH batteries can be used.
Using AA batteries
Open the battery compartment cover on the back
of the unit. Fit two AA batteries to the + and –
marks shown in the compartment, and close the
battery compartment cover.
When using AA batteries, set the type of battery
in order to accurately show the amount of power
remaining and allow the unit to accurately
determine whether power is available for proper
operation. (See “Setting the type of AA batteries” on
NOTE
• Manganese dry cell batteries (R6) cannot be used with
this unit.
• This unit cannot recharge Ni-MH batteries. Use a
commercially available recharger.
• The included alkaline batteries are for confirming
operation of the unit and might not last very long.
Using an AC adaptor (sold
separately)
Connect the PS- P515U AC adaptor and the USB
cable to the USB port of the unit as shown in the
illustration.
3–Preparation
