manualshive.com logo in svg

Tascam DM-3200, Release Notes, Page: 11 / 26

Share
Download
Tascam DM-3200 Release Notes Download Page 11

DM-3200 Release Notes

TASCAM  DM-3200 Release Notes V1.50

 

11

By installing an IF-FW/DM FireWire interface card (sold 
separately) into 

Slot 1

 of the DM-3200 Ver1.20, you can 

transfer audio data between your computer and the DM-3200. 
An IF-FW/DM inserted into 

Slot 2

 will not function.

Figure 1 is an example of the panel display when an 
IF-FW/DM card is installed in 

Slot 1

.

For more details, please refer to the IF-FW/DM documentation.

FireWire card support

Surround monitor card support

By installing an IF-SM/DM surround monitor card (sold 
separately), you can add integrated surround monitoring to 
the DM-3200.

Figure 1 shows an example of the screen display when 
IF-SM/DM card is inserted in 

Slot 2

.

For more details, please refer to the owner’s manual that 
comes with the IF-SM/DM card.

Figure 1: SLOT screen when an IF-FW/DM and an 

IF-SM/DMare installed

Naming the mixer

DM-3200 Ver1.20 allows you to set and edit mixer names 
so that you can easily differentiate between multiple 
mixers with the TASCAM Mixer Companion computer 
application.

1  On the 

UTILITY SYSTEM

 screen, move the cursor to 

the 

EDIT

 button in the 

MIXER NAME

 section. Press the 

ENTER

 key.

Figure 2: UTILITY>SYSTEM screen

 

A pop-up window will appear for editing the mixer 
name.

Figure 3: Name edit pop-up screen

NOTE

You can cancel the entered name by pressing the 

POD3

 key (CANCEL).

Summary of Contents for DM-3200



























Reviews:

No comments