Tascam Dante AE-4D, Owner'S Manual

Page: 13 / 80

TASCAM AE-4D
13
6
Latency setting
Set the latency.
Use the following guidelines to change the latency set-
ting.
Selectable
latency value
Connected network setup guide-
line
1 msec
The transmission route from the
transmitting device to the receiving
device passes through 10 gigabit
switching hub.
2 msec
The transmission speed of the
transmitting device is 100 Mbps.
5 msec
Use this maximum selectable la-
tency value when creating a large-
scale network.
ATTENTION
i
Changing the name of a device will clear audio routing
settings. For this reason, we recommend changing de-
vice names to names that are easy to identify before set-
ting audio routings.
i
Depending on network connection conditions, setting
the latency to a value higher than the guideline might
be necessary.
NOTE
When using a switched (daisy chain) connection, which
does not use a switching hub, set the latency accord-
ing to the number of Dante devices that signals pass-
through as shown below.
Switched (daisy chain) connection example
Passes through 2 devices
Passes through 1 devices
Transmitting
device
Transmitting
device
Receiving
device
Receiving
device
1st device
1st device
2nd device
Specifications
General
Formats and channels
44.1/48 kHz,16/24-bit, 4 channels
88.2/96 kHz,16/24-bit, 2 channels (double speed)
Input/output ratings
DATA/DATA+PoE connectors
Connector: RJ-45
Transmission protocol: Dante
Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
Cables: category 5e or faster STP cables
DIGITAL INPUT (AES/EBU) connectors
Connector: XLR-3-31
Input impedance: 110 Ω
Format: AES3-2003/IEC60958-4 (AES/EBU)
Supported sampling frequencies: 32 kHz – 192 kHz
(Sampling rate converter is always on)
DIGITAL OUTPUT (AES/EBU) connectors
Connector: XLR-3-32
Input impedance: 110 Ω
Format: AES3-2003/IEC60958-4 (AES/EBU)
Supported sampling frequencies: 44.1, 48, 88.2 and
96 kHz
Other
Power
PoE class 0
TASCAM PS-P1220E AC adapter (sold separately)
Power consumption
3W
Dimensions
214 × 44.45 × 136.1 mm (W x H x D, including protrusions)
Weight
795 g
Operating temperature range
0°C–40°C
0
See the back of this manual for dimensional drawings
and DSP block diagrams.
0
Illustrations in this manual might differ in part from the
actual product.
0
Specifications and external appearance might be changed
without notification to improve the product.