background image

       DA-6400/DA-6400dp

28 

TASCAM  DA-6400/DA-6400dp

New functions in firmware version 1.30

The following new functions have been added in firmware version 1.30.

 

0

DA-6400 Control iPad remote control app support added

 

0

TASCAM IF-AE16 AES/EBU interface card support added

 

0

Function added to synchronize with SMPTE timecode and play the current take

 

0

VAMPING mode added to repeat playback function modes

 

0

Function added to set the input and output signal routing for each individual channel

 

0

On/off setting added for NO SIGNAL error checking function

 

0

Function added that requires pressing and holding the button to stop recording

TASCAM DA-6400 Control iPad remote control app support added

The TASCAM DA-6400 Control iPad remote control app is now supported.

TASCAM IF-AE16 AES/EBU interface card support added

The TASCAM IF-AE16 AES/EBU interface card is now supported.
If installed in SLOT 1 or SLOT 2 of this unit, the following appears 
on the 

SLOT1

 or 

SLOT2

 menu page.

CLOCK LINE

If the slot with the IF-AE16 card installed is selected to be the 
clock master for the unit, this selects the signal line to use as 
the clock master.

Options:  

AES 1-2

 (default), 

AES 3-4

AES 5-6

,    

AES 7-8

AES 9-10

AES 11-12

,  

AES 13-14

AES 15-16

NOTE

 

i

When the slot with the IF-AE16 card installed is selected to be 
the clock master, you can also set the 

CLOCK LINE

 item on 

the 

CLOCK

 screen that opens from the 

GENERAL

 page 

CLOCK 

MASTER

 item. Moreover, if the slot with the IF-AE16 installed 

is selected to be the clock master, you can also change the set-
ting by moving the cursor to 

APPLY

 and pressing the MULTI 

JOG dial.

 

i

If the 

SRC

 item is set to 

ON

 for a signal line, it cannot be se-

lected as the master clock In this case, the following pop-up 
window appears. A confirmation pop-up message appears.A 
confirmation pop-up message appears.

Summary of Contents for DA-6400





































Reviews: