TASCAM DA-6400/DA-6400dp
9
DA-6400/DA-6400dp
1.
Move to the current folder on the
BROWSE
screen from the
menu screen.
As shown by the red frame below ( ), Take List and Playlist
file names are shown with either
<TakeList>
or
<Play-
list>
in gray characters at the top of the folder list.
As shown by the orange frame below ( ), a yellow icon
is shown next to the currently loaded file.
NOTE
If the current folder does not contain any playlist files, the
unit will automatically generate an empty playlist file named,
“
da6400PPL.ppl
”.
2.
Turn the MULTI JOG dial to select a playlist file.
3.
Press the MULTI JOG dial to open the menu.
4.
Select
LOAD
and press the MULTI JOG dial to open a load
pop-up confirmation message.
5.
Press the MULTI JOG dial to open a pop-up message, and
switch to Playlist Mode if a playlist was loaded.
6.
When loading completes, the playlist entry list screen opens.
In the current folder list display, a yellow current playlist
icon appears next to the loaded playlist, as shown in the or-
ange frame below ( ).
Creating new playlists
In addition to the automatically created “
da6400PPL.ppl
”
playlist, you can also create new playlists in the JPPA PPL format
in the current folder.
1.
Move from the menu screen to the current folder on the
BROWSE
screen, and turn the MULTI JOG dial to select the
current folder or playlist file on the top line.
2.
Press the MULTI JOG dial to open the menu, and select
CREATE PLAYLIST
.
3.
Press the MULTI JOG dial to open a screen where you can
input the name of the created playlist.
4.
Input the name of the playlist being created. For details
about how to input names, see “Editing text” in “4 – Record-
ing” of the Owners Manual.
5.
After editing the playlist name, select
ENTER
, and press the
MULTI JOG dial to open a confirmation pop-up message.
6.
Press the MULTI JOG dial to open a pop-up message, and
create a playlist.
NOTE
i
The playlist just created becomes the current playlist.
i
If the playlist was created in Take List Mode, the unit switches
to Playlist Mode.