TASCAM CD-RW900
27
Erasing tracks
This operation erases the specified track and all sub-
sequent tracks from a recorded CD-RW disc.
1
During stop, press the
ERASE/DEL
key on the front
panel or the
ERASE
key on the remote control. Se-
lect the
ERASE TRACK?
rotating the
MULTI JOG
dial or pressing the
SKIP
keys on the remote con-
trol.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2
Push the
MULTI JOG
dial or press the
ENTER
key
to enter the function.
The display shows
Erase XX-XX
(the number of the
first track and last track to be erased).
Rotate the
MULTI JOG
dial or press the
SKIP
key to
change the track numbers you desire to erase.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
3
Push the
MULTI JOG
dial or press the
ENTER
key
to operate the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP
key.
4
Push the
MULTI JOG
dial or press the
ENTER
key
again to proceed the operation.
The display shows the
Erase
flashing and the re-
maining time. The unit starts counting down from a
time shown on the display.
NOTE
Once the operation is proceeded, the
STOP
key cannot
function. Please confirm before the operation.
5
When the tracks have been erased,
Complete
will
appears on the display.
Erasing a whole disc
When you want to erase a whole disc (all the tracks on
a disc), follow the procedure below:
1
During stop, press the
ERASE/DEL
key on the front
panel or the
ERASE
key on the remote control. Se-
lect the
ERASE DISC?
rotating the
MULTI JOG
dial
or pressing the
SKIP
keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2
Push the
MULTI JOG
dial or press the
ENTER
key
to enter the function.
The display shows
Sure?
.
To cancel the operation at this point, press the
STOP
key.
3
Push the
MULTI JOG
dial or press the
ENTER
key
again to proceed the operation.
The display shows the
Erase
flashing and the re-
maining time. The unit starts counting down from a
time shown on the display.
NOTE
Once the operation is proceeded, the
STOP
key cannot
function. Please confirm before the operation.
4
When the disc has been erased,
Complete
appears
then
Blank Disc
will appear on the display.
Refreshing a disc
Refreshing the disc makes a disc usable again. This op-
eration destroys all data on the disc.
1
Load the disc, and the unit in stop mode, press the
ERASE/DEL
key on the front panel or the
ERASE
key on the remote control. Select the
REFRESH?
rotating the
MULTI JOG
dial or pressing the
SKIP
keys on the remote control.
To cancel the operation at this point, press the
ERASE/DEL
or the
ERASE
key again.
2
Push the
MULTI JOG
dial or press the
ENTER
key
on the remote control to enter the function.
The display shows
Sure?
To cancel the operation at this point, press the
STOP
key.
3
Push the
MULTI JOG
dial or press the
ENTER
key
again to proceed the operation.
The display shows the
Erase
flashing and the re-
maining time. The unit starts counting down from a
time shown on the display.
4
When the disc has been refreshed,
Complete
will
appear on the display, and
Blank disc
shows up.
6-After recording
Erasing